Allied Manta Guide d'installation télécharger pdf (Page 21)

AVT camera cleaning instructions

Manta Hardware Installation Guide V4.1.0

3. If the impurity is neither on the lens nor the IR cut filter/protection

glass, it is probably on the sensor.

Cleaning Instructions

Perform all cleaning operations (lenses, filter/protection glass, sensor in a

dust-free clean-room. The optical components are very fragile so it is impor-

tant to avoid touching them with your fingers or any hard material.

1. Unplug the camera from any power supply before cleaning.

2. Apply a small amount of optics cleaner (60% ethyl alcohol, 40% ether)

to clean, new lens cleaning tissue.

Acceptable material includes medical-grade sterile optical cotton, or

lens tissue that is chemically pure and free from silicones and other

additives.

– Do not use cosmetic cotton.

– Do not use consumer eyeglass cleaning cloths pre-treated with sili-

con.

Note



• Taking out the filter requires special care.

• Ask your dealer to help you if you are not confident

with the procedure.

Figure 3: Removing IR cut filter/protection glass using special tool (E9020001)

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 60 61

Pas de commentaire

Allied Manta Guide d'installation Page 21